Many people like lounging in their houses’ swimming pools during the sweltering summer months. Homeowners start thinking about replastering their pool when the interior starts to appear ugly. A malfunctioning filtration system could be the cause of the pool’s ugly appearance. In one way or another, as a crucial component of the pool’s filtration system, you must be aware of the cost of replacing a pool pump.
COST OF POOL PUMP REPLACEMENT
Having a swimming pool requires you to perform routine maintenance, such as heater repairs, pool pump replacements, and liner repairs. A major component of the filtration system in a pool is the pool pump, which eventually wears out. High-quality pool pumps require replacement every eight to twelve years on average.
The cost of the replacement pump, which can range from $150 to $1,000 or more depending on the kind and size of the pool, is the only expense associated with do-it-yourself pool pump replacement. Labor, which may add up to an additional $100 to $300, is included in the price when employing a professional.
A POOL PUMP’S REPLACEMENT TIMINGS
A pool pump consists of two main components: the pump mechanism and the motor mechanism. Any of them could falter and require your care. A pool pump may need to be replaced if it has completely failed, is leaking water, produces loud grinding or screaming noises, or is no longer able to move water.
REPLACEMENT OF A POOL PUMP OR MOTOR
Replacing simply the motor might be a viable option if the pool pump is relatively young (less than ten years old) and the pump’s exterior doesn’t exhibit any symptoms of deterioration. Replacing the entire pump is the best option if it’s an older pump, the motor replacement components are difficult to acquire, or the cost of the replacement exceeds 75% of the cost of a new pump. The entire pool pump should be replaced if it is still covered under warranty.
Replacing the motor alone will save you more money than replacing the entire pool pump. Hiring a professional can cost an extra $100 to $200 on top of the $50 to $400 cost of a do-it-yourself engine replacement.
CHOICES FOR POOL PUMP REPLACEMENT
Conventional pool pumps use single-stage motors, which are quite energy-hungry. The U.S. Department of Energy estimates that the typical device uses approximately $500 worth of electricity annually. Modern technology allows two-stage motors and adjustable-speed units to operate at speeds as low as 600 RPM and consume up to 90% less energy than their conventional counterparts. Additionally, most of the time, they work with automated home systems.
BUY A PROFESSIONAL OR DO IT YOURSELF?
It takes some comfort level and basic electrical understanding to replace a pool pump. Neglecting to implement suitable safety measures or improperly wiring the newly installed pump may result in severe harm, impairment of the pump, or other forms of property loss. Replacing a pool pump would not be a good choice if you are uncomfortable working with electricity; instead, you should think about contacting a competent pool professional.
Replacing a pool pump could be an easy do-it-yourself project if you’re experienced working with electricity. You can save money by not having to pay for labor.
[/vc_column_text][/vc_column][/vc_row]
